Condensing boiler
According to the Non-domestic building services compliance guide, 2013 edition, published by HM Government, a condensing boiler is: '… a boiler that offers a high energy efficiency by recovering heat from the flue gases. This is achieved by increasing the heat exchanger surface area, which recovers extra sensible heat whenever the boiler fires. The boiler becomes even more efficient when system water temperatures are low because the larger heat exchanger area promotes condensation, allowing much of the latent heat to be recaptured. Standard losses (when the boiler is not firing) are low, and part load performance is very good. In multiple-boiler systems, condensing boilers can be used as the lead boiler.'
The Illustrated Guide to Mechanical Building Services, Third Edition (BG 31/2017), by David Bleicher, published by BSRIA in 2017, states in relation to condensing boilers: ‘The flue gases (otherwise known as products of combustion) from a conventional boiler consist primarily of carbon dioxide (CO2) and water vapour, plus other gases such as oxides of nitrogen. The water vapour holds a significant amount of energy, known as latent heat. In a condensing boiler, the flue gases are cooled before being discharged, so the water vapour condenses (turns into liquid water). The latent heat released is used to preheat water returning to the boiler, and so condensing boilers are more energy-efficient than conventional ones. In order for this condensing process to work, the return water must be below a certain temperature. For this reason, and also that the flue gases are cooler and less buoyant, condensing boilers can’t always directly replace non-condensing boilers in existing buildings.’
[edit] Related articles on Designing Buildings
- Balanced flue appliance.
- Biomass boiler.
- Boiler efficiency.
- Carbon monoxide detector.
- CHP boiler.
- Coefficient of Performance CoP.
- Combustion appliance.
- Domestic building services compliance guide.
- Domestic micro-generation.
- Energy related products regulations.
- Fluepipe.
- Gross calorific value.
- Heat generator.
- Heat interface units.
- Heat pump.
- Industrial gas boilers market 2020.
- Non-domestic building services compliance guide.
- Types of domestic boiler
Featured articles and news
Editor's broadbrush view on forms of electrical heating in context.
The pace of heating change; BSRIA market intelligence
Electric Dreams, Boiler Realities.
New President of ECA announced
Ruth Devine MBE becomes the 112th President of the Electrical Contractors Association.
New CIAT Professional Standards Competency Framework
Supercedes the 2019 Professional Standards Framework from 1 May 2025.
Difficult Sites: Architecture Against the Odds
Free exhibition at the RIBA Architecture Gallery until 31 May.
PPN 021: Payment Spot Checks in Public Sub-Contracts
Published following consultation and influence from ECA.
Designing Buildings reaches 20,000 articles
We take a look back at some of the stranger contributions.
Lessons learned from other industries.
The Buildings of the Malting Industry. Book review.
Conserving places with climate resilience in mind.
Combating burnout.
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.